精品国产香蕉,亚洲成年网站在线观看,国产精品午夜激爽毛片,国产精品美乳免费看,免费看美女隐私不遮视频动漫,韩国美女片在高清视频播放,加拿大美女视频

The refining agent can be widely used in metal smelting and foundry industries. It is a compound of multiple elements, and it is more conducive to metal smelting after adding. In the process of metal smelting, deoxidation, desulfurization, degassing, and degassing are all difficult. Now, with the refining agent, various impurities can be effectively removed, making the metal more pure.

Adding refining agent is more conducive to metal smelting

If the gas and impurities are not removed in time during the metal smelting process, pores, cracks, cold barriers, shrinkage and other defects will appear, resulting in a decline in product quality. After adding the refining agent, the technical deficiencies encountered in the metal casting process can be eliminated. After the addition, the crystal grains can be refined, the fluidity of the metal can be enhanced, and the impurities of the molten metal can be eliminated in time.

In addition, various oxides, sulfides, silicates, etc. will be mixed in the metal during the smelting process. These impurities can be removed after adding to improve the mechanical properties of the metal. In the smelting process, if the molten metal is in contact with the atmosphere, pores will appear. Therefore, the gas in the molten metal must be removed in time to improve its mechanical properties.

Adding can purify the metal melt, remove the exhaust gas in the melt in time, and has obvious functions of deoxidation, desulfurization, and desulfurization, thereby reducing the content of impurities in the melt. The addition of refining agent can separate the residue, and eliminate the waste gas by mixing with the liquid to prevent the production of needles. In addition, it can also avoid slag inclusion, dust inclusion, pores, nodules, cold partitions, etc.

The refining agent needs to be used according to the conventional method, because the amount of the refining agent is relatively small, so it can not be expected that the existing reduction and deoxidation processes can be used. If there are crusts and slag on the surface during the smelting process, the surface scum must be removed in time before pouring.