精品国产香蕉,亚洲成年网站在线观看,国产精品午夜激爽毛片,国产精品美乳免费看,免费看美女隐私不遮视频动漫,韩国美女片在高清视频播放,加拿大美女视频

In order to improve the various properties of aluminum, various alloy elements need to be added to make alloys of different grades. At present, the domestic basically adopts alloy or pure metal to join. Some domestic aluminum processing plants have replaced master alloys with metal additives. It can be seen from the use effect that additives not only have all the advantages of master alloys, but also overcome some of the disadvantages of master alloys, so additives are more and more widely used.

Metal additive application: alloy element addition in aluminum alloy smelting.

Advantages of metal additives:

Additives: Aluminum and aluminum alloy additives are far superior to master alloys due to their 8 addition mechanism and convenient use method, stable element yield and economical production methods. It avoids that the melting temperature is too high, which causes the life of the melting furnace to be reduced, increases the burning loss of aluminum and alloy elements, reduces the melting productivity, and deteriorates working conditions. More serious is the uneven composition of the master alloy, which brings a series of difficulties to the control of the alloy element content in the future. For most civilian aluminum alloys, it is an ideal material to replace master alloys.

Instructions for use of aluminum and metal additives:

Aluminum and metal additives can be added directly to the melting furnace or the holding furnace, but they must be added before refining. In order to achieve the desired actual yield of alloying elements, other matching conditions are required. The specific instructions are as follows:

Due to the pure metal addition mechanism, the absorption rate of alloying elements always increases with the increase of temperature. Field experience has proved that aluminum and aluminum alloy additives are sensitive to temperature, especially manganese additives. The temperature of the molten aluminum should be controlled at 740±10℃ and the additives should be added, otherwise the metal absorption time will be prolonged.